How to build TRIAC Light Dimmer



This little circuit can be used to dim lights up to about 350 watts. It uses a simple, standard TRIAC circuit that, in my expirience, generates very little heat. Please note that this circuit cannot be used with fluorescent lights.

Circuit diagram

Parts
R1 50K Pot
R2 15K 1/2W Resistor
C1, C2 0.068 250V Capacitor
L1 Lamp To Be Controlled (up to 350 watts)
L2 Neon Lamp
TR1 40502 TRIAC
MISC Case, Knob, Heatsink For TR1, Wire, Socket For L1

Notes
1. This circuit is for 117VAC only. 220 or 240 V will burn up the circuit. L1 can be a maximum of 350 watts.
2. The circuit must be installed and used in a case.


Author:
Email:
Website: http://www.aaroncake.net

Similar diagrams


Important!!!
We are not responsible for any injuries or damage caused by information from this website! Working with electricity is dangerous for your life, especially diagrams related to high voltage! We do not guarantee success in building devices using our diagrams! They are not tested by us. For questions about diagrams use author info below diagram or our contact page. Thank you!